Getting Started 21
Switching the Device On or Off
Once the device has been configured, you will not be prompted with
setup screens again.
To turn the device on:
Press and hold (
Power/End
) until the device switches
on.
The device searches for your network and after finding it, you
can make or receive calls.
Note:
The display language is preset to English at the factory. To
change the language, use the Language menu. For more
information, refer to “Language and Input Settings” on
page 373.
To turn the device off:
1. Press and hold (
Power/End
) until the Device options
screen appears.
2. Tap
Power off
() ➔
OK
.
Restarting the Device
1. Press and hold (
Power/End
) until the Device options
screen appears.
2. Tap
Restart
() ➔
OK
.
To Next Page
Loading...
