246
6. Confirm the connection by making sure both your TV and
device show the same image/screen and (
Wi-Fi Direct
Communicating
) now displays on the device.
Important!
The AllShare Cast Hub is a 1-to-1 connection. If a previous
device was paired to the Hub and is still connected to the
AllShare Cast Hub, you can not pair a new device until the
first connection is stopped.
To disconnect your device from the hub:
1. Access your device’s
AllShare Cast
screen and locate the
current connection.
2. Tap the entry and select
End connection
.
To reconnect your device again to an existing hub:
1. Locate the AllShare Hub (dongle) name displayed at the bottom
of the TV (showing the tutorial). Ex: Name:
Dongle - XXXXXX
.
Important!
Verify the LED is not a solid blue. This indicates there is
another device currently connected.
2. Access your device’s
AllShare Cast
screen and tap the same
hub/dongle name in the list.
3. Confirm the connection by making sure both your TV and
device show the same image/screen.
To Next Page
Loading...
