326
Wi-Fi Direct Setup and Settings
You can configure your device to connect directly with other Wi-Fi
capable devices. This is an easy way to transfer data between
devices. These devices must be enabled for Wi-Fi direct
communication. This connection is direct and not via a HotSpot or
WAP.
Displays when Wi-Fi Direct is active and configured for a
direct connection to another compatible device in the
same direct communication mode.
Displays when Wi-Fi Direct is active and
communicating.
Note:
Activating this feature will disconnect your current Wi-Fi
network connection.
To activate your connection:
1. From the main
Settings
page, touch and slide the
Wi-Fi
slider
to the right to turn it on. The slider color indicates the
activation status.
2. Tap
Wi-Fi Direct
.
3. Tap
Scan
and select the single device name to begin the
connection process to another Wi-Fi Direct compatible device.
– or –
Tap
Multi-connect
➔
Scan
and select all the device names to
begin the connection process to these Wi-Fi Direct compatible
devices.
To Next Page
Loading...
