Applications 206
Initial Configuration
1. Sign into your Samsung account.
2. From the Home screen, tap âž”
WatchON
.
Note:
If you are not connected to an active Wi-Fi, you may be
prompted to continue the set up process via a mobile
network. Click
Connect
to proceed.
3. Select your desired country for your TV Guide’s source
listing and tap
Next
.
4. Enter your current zip code and tap
Done
. This zip code
must correspond to the location of your desired TV and
set top box.
5. From the
Find your TV service
screen, select a service
provider from the available channel listing.
6. From the
Personalize
screen, you can either follow the
on-screen prompts to personalize your desired content
or tap
Skip
to continue without customizing your
content.
7. Read the on-screen Peel agreement and tap
Agree
to
complete the set up process.
8. From the top of the main screen, tap
(Remote
Control)
âž”
Set up now
.
9. From the
Select your TV Brand
screen, tap your TV’s
manufacturer name.
•
If you have a brand of TV not listed or you are using a projector,
select from one of the following two options. Choose from
either
Show other brands
or
I have a home projector
.
10. Aim your device at the TV and tap (
Power
) to
confirm the set up process completed successfully and
the correct TV IR codes were selected.
Note:
The process of the initial TV activation can take up to 10
seconds. Please do not press the button again.
11. If the TV turned on, tap
Yes
.
– or –
If the TV did not turn on after tapping (
Power
) and
waiting 10 seconds, tap
No
or
Retry
.
12. From the
Select your channel source
screen, select the
entry that corresponds to your current channel control
method:
To Next Page
Loading...
Need help?
General
