Samsung Galaxy tab 2 10.1 - Adding a Wi Fi Network Manually

150
Adding a Wi - Fi Network Manually
1. From a Home screen, tap Apps ➔ Settings .
2. Under
Wireless and network , on the Wi-Fi tab, tap the
OFF / ON icon to turn Wi-Fi on.
3. Tap
Add Wi-Fi network , then enter network information:
• Network SSID : Enter the name of the Wi - Fi Wireless Access
Point (WAP).
• Security : Select the type of security used by the WAP.
Note: Depending on the Security protocol used by the WAP,
additional network information may be required, such as
a Password.
• Password : If the WAP is secured, enter the password or hex
key.
4. Tap Save to store the new information and connect to
the target WAP.
Note: No prompt to enter the WAP key displays if this is the
second time to connect to a previously accessed or
secured wireless network. The WAP key is required
when the device is reset using factory default settings.
Wi-Fi Sleep Policy
Specify when to disconnect from Wi-Fi.
1. From a Home screen, tap
Apps ➔ Settings .
2. Under
Wireless and network , tap Wi-Fi .
3. Tap
Menu ➔ Advanced .
4. Tap
Keep Wi-Fi on during sleep . Choose from: Always ,
Only when plugged in , or Never (increases data usage) .
ON