Connections 151
Wi-Fi Direct
Wi-Fi Direct allows device-to-device connections so you can
transfer large amounts of data over a Wi-Fi connection.
1. From a Home screen, tap
Apps
➔
Settings
.
2. Under
Wireless and network
, tap
Wi-Fi
➔
Wi-Fi Direct
.
3. Tap the
OFF / ON
icon to turn Wi-Fi Direct on.
If you are currently connected to a Wi-Fi network, a
prompt displays
Start Wi-Fi Direct operation. This will
turn off Wi-Fi client/hotspot operation
.
4. Tap
OK
to continue.
Your device will begin to search for other devices
enabled with Wi-Fi direct connections.
Note:
Confirm (
Wi-Fi Direct On
) appears at the bottom of
the screen.
5. Tap the Wi-Fi Direct field to display Available devices.
6. Enable Wi-Fi Direct (similar to Steps 1 and 2) on the
device to which you want to connect.
Note:
The target device must also have Wi-Fi Direct service
active and running before it is detected by your device.
7. Tap
Scan
and select the single device name to begin
the connection process to another Wi-Fi Direct
compatible device.
8. Once the device you want to connect to is displayed,
tap it.
An Invitation to connect displays on the device to which
you want to connect.
9. On that target device, tap
Accept
.
You have 2 minutes to tap
Accept
on the device to
which you want to connect for the connection to be
made.
Once connected, the other device will show as
Connected
in your list of Wi-Fi Direct devices and the
icon will display at the bottom of your screen.
ON
To Next Page
Loading...
