244
Hearing
When Mono audio is enabled, you can listen through one
earphone to mono audio sound.
1. From the main
Settings
page, tap
Accessibility
.
2. Touch
Mono audio
.
When enabled, a check mark appears in the check
box.
To turn off all sounds including receiver voice:
1. From the main
Settings
page, tap
Accessibility
.
2. Touch
Turn off all sounds
.
When enabled, a check mark appears in the check
box.
Mobility
This option allows you to set the Press and hold delay time.
1. From the main
Settings
page, tap
Accessibility
.
2. Tap
Press and hold delay
, and then touch a delay time.
Options are: Short, Medium, and Long.
Developer Options
Set options for application development.
1. From the main
Settings
page, tap
Developer options
.
2. The following options are available:
• Desktop backup password
: Allows you to protect your
desktop with a backup password ID.
• Stay away
: with the Stay away option enabled, your screen will
never sleep while you are charging the device.
• Protect SD card
: Requires apps to ask your permission before
accessing data on your SD card.
• USB debugging
: Allows debugging when the device is
attached to a PC by a USB cable.
• Allow mock locations
: Used by developers when developing
location-based applications.
• Select app to be debugged
: Allows developers to select a
specific app to debug.
• Wait for debugger
: Specified apps must have debugger
attached before executing.
• Show touches
: Displays touch interactions on the screen.
• Show pointer location
: Highlights the data that was touched
on the screen.
To Next Page
Loading...
