EasyManua.ls Logo

Samsung GALAXY Tab 2 7.0 - Power Saving Mode

Samsung GALAXY Tab 2 7.0
151 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Settings 121
Mounting an SD Card
1. Install an SD card. For more information, refer to
“Installing a Memory Card” on page 13.
2. From a Home screen, touch
Apps
Settings
Storage
.
3. Touch
Mount SD card
.
Unmounting an SD Card
1. From a Home screen, touch
Apps
Settings
Storage
.
2. Touch
Unmount SD card
.
3. At the prompt, select
OK
to safely unmount the memory
card.
4. Remove the SD card from the slot. For more
information, refer to “Removing a Memory Card” on
page 13.
Note:
Unmounting an SD card may stop some applications
from functioning. The applications may not be available
until you mount the SD card again.
Formatting an SD Card
When formatting an SD card you will want to backup your
music and photo files that are stored on the card because
formatting the SD card deletes all the stored data.
1. From a Home screen, touch
Apps
Settings
Storage
.
2. Touch
Format SD card
and then touch
Format SD card
again on the warning screen.
3. Touch
Delete all
.
Power Saving Mode
When enabled, your device automatically adjusts CPU
performance and the brightness to conserve battery power.
1. From a Home screen, touch
Apps
Settings
Power saving mode
.
2. On the Power saving tab, touch the
OFF / ON
icon
to turn Power saving on or off.
3. Turn Power saving on and touch the Power saving
mode settings (
CPU power saving
or
Screen power
saving
) to enable or disable them.
4. Touch
Learn about power saving
to display more
information about saving power.

Table of Contents

Related product manuals