Samsung Galaxy Tab S - Au Micro IC Card (LTE)

25
Getting ready Getting ready
au Micro IC Card (LTE)
Your phone number etc. is recorded on the au Micro IC Card
(LTE).
This product is compliant with au Micro IC Card (LTE) only.
IC cards other than the au Micro IC Card (LTE) cannot be
used.
Power o󱐯 the product before attaching/removing the au
Micro IC Card (LTE).
• Do not touch the IC (metal) part of the au Micro IC Card (LTE)
or the IC card terminal inside the product.
(Frontside)
(Backside)
IC(metal)part
auMicroICCard(LTE)
• Do not use force to attach or remove.
• Check that the card is inserted in the correct direction.
• Do not lose the au Micro IC Card (LTE) after it has been
removed.
• Do not insert an IC card to which a conversion adapter is
attached. Doing so may cause a fault.
■ Attaching the au Micro IC Card (LTE)
a
Open au Micro IC Card (LTE) slot cover
b
Turn the IC contact (metal) of au Micro IC Card
(LTE) down and orient the notch as illustrated,
and insert it into au Micro IC Card (LTE) slot
until it clicks into place
IC
Notch
c
Press au Micro IC Card (LTE) slot cover rmly
and make sure that there is no gap in between
◎ If the card does not click into place, use a rounded object (1
yen coin, etc.) to slowly insert the card until it clicks into place.
◎ If hard sharp objects or easily breakable objects (a driver, a
toothpick, etc.) are forcibly inserted in, foreign matter may get
in or the frame might get scratched.