Samsung Galaxy Tab S - Charging

27
Getting ready Getting ready
◎ If the card does not click into place, use a rounded object (1
yen coin, etc.) to slowly insert the card until it clicks into place.
◎ If hard sharp objects or easily breakable objects (a driver, a
toothpick, etc.) are forcibly inserted in, foreign matter may get
in or the frame might get scratched.
■ Removing a microSD memory card
a
Open microSD memory card slot cover
• To remove microSD memory card with the product turned
on, on the home screen, tap [基本機能 (Basic function)] →
[Settings] → [General] → [Storage] → [Unmount SD card]
→ [OK] and conrm that
is displayed on the status bar
before removing it.
b
Push microSD memory card all the way until
it clicks, and take out the slightly protruding
microSD memory card
c
Press microSD memory card slot cover rmly
and make sure that there is no gap in between
◎ Do not use force to remove the microSD memory card. Doing
so may cause a fault or data loss.
◎ After using this product for a long time, the removed microSD
memory card may be warm; this is normal.
Charging
When you purchase your product, the internal battery is not
fully charged. Be sure to charge the internal battery before
use.
• "Charging: XX%" appears under the date and time on the lock
screen when charging. (
u
P.30)
CommonAC
adapter05
(soldseparately)
microUSBcable01
(soldseparately)
microUSBplug
ToAC100Voutlet
* You cannot charge using both the specied AC adapter (sold separately) and a
PC at the same time.
Failure to do so may cause signicant damage to the
product. Damage from incorrect connection is out of
compensation.
◎ Quick charging can be used when the power is o󱐯 or backlight
of screen turns o󱐯.
◎ When battery level is 50% or more, charging speed by quick
charging may be slow.
◎ Charging with a PC or using the camera function or other
functions while charging may increase charge time.