Apps and features
41
Charging the S Pen
The S Pen must be charged before you can control apps remotely by using the S Pen
button.
When the S Pen and the S Pen charger are properly aligned, charging will begin.
If the Air action feature is turned off, the S Pen will be charged only when the device is
charging.
•
If the device and the S Pen are not attached like in the image, the S Pen may not
be charged. Attach the S Pen by aligning the top of the S Pen to the end of the
S Pen charger as shown in the image.
•
If you use the device on the floor with the S Pen attached to the S Pen charger, it
may scratch the S Pen. To prevent this, attach the S Pen to the top of the device.
However, the S Pen will not charge in this case.
To Next Page
Loading...
