7.
Level
2
Repair
7-1
Confidential and proprietary-the contents in this service guide subject to change without prior notice.
Distribution, transmission, or infringement of any content or data from this document without Samsung
’s
written authorization is
strictly prohibited.
Be careful not to scratch cover. Follow the numbered sequence when you disjoint
Be careful not to damage the FPCBs Be careful not to damage the FPCBs
7-1.
Disassembly and assembly Instructions
7-1-1.
Disassembly
Carefully release the screws
at
2
different locations
(
Torque
1.1 ± 0.1
kgf.cm)
(
Size:1.4*2.0)
1
Disengage the rear cover with the front
cover by using the hook
2
3
Separate the
30
PIN I/F connector, TSP
connector, LCD connector from the PBA.
4
1
2
3
4
30 PIN I/F
TSP
LCD
◆blue:L2.5
Release the screw at
2
points
(
Size:)(Torque:
1.1±0.1
kgf.cm)