Connect to a Wi-Fi AP using a Wi-Fi Protected
›
Setup (WPS)
Using WPS, you can connect to a secured network.
To connect to a Wi-Fi AP with a WPS button,
In Idle mode, open the application list and select
1
Settings
→
Wireless and networks
→
Wi-Fi settings.
Select
2
WPS button connection.
Press a WPS button on the access point within 2 minutes.
3
To connect to a Wi-Fi AP with a WPS PIN,
In Idle mode, open the application list and select
1
Settings
→
Wireless and networks
→
Wi-Fi settings.
Select a network indicated by the WPS icon and select
2
WPS PIN.
On the access point, enter the PIN and press the start
3
button.
Mobile network sharing
Learn to set your device as a wireless modem or wireless
access point for PCs or other devices, and share your device’s
mobile network connection.
›
Share your device’s mobile network via Wi-Fi
In Idle mode, open the application list and select
1
Settings
→
Wireless and networks
→
Tethering and portable
hotspot.
Select
2
Portable Wi-Fi hotspot to activate the Wi-Fi
tethering feature.
To Next Page
Loading...
