Samsung GT-S7500 - Wi-Fi Direct

Connectivity
101
Connect to a Wi-Fi AP using a Wi-Fi Protected
›
Setup (WPS)
Using WPS, you can connect to a secured network.
To connect to a Wi-Fi AP with a WPS button,
In Idle mode, open the application list and select
1
Settings
→
Wireless and network
→
Wi-Fi settings.
Select
2
WPS button connection.
Press a WPS button on the access point within 2 minutes.
3
To connect to a Wi-Fi AP with a WPS PIN,
In Idle mode, open the application list and select
1
Settings
→
Wireless and network
→
Wi-Fi settings.
Select a network indicated by the WPS icon and select
2
WPS PIN.
On the access point, enter the PIN and press the start
3
button.
Wi-Fi Direct
Learn to use the Wi-Fi Direct feature to connect two devices
via a Wi-Fi network without requiring an access point.
Connect your device to another device
›
In Idle mode, open the application list and select
1
Settings
→
Wireless and network
→
Wi-Fi Direct settings
→
OK
→
Wi-Fi Direct.
Press [
2
]
→
Scan.
Select a device and then select
3
Connect.
When the owner of the other device accepts the
connection, the devices are connected.