Mobile networks
›
Use packet data
●
: Set to allow packet switched data
networks for network services.
Data roaming
●
: Set the device to connect another network
when you are roaming or your home network is not
available.
Access Point Names
●
: Set up access point names (APNs).
Network mode
●
: Select a network type.
Network operators
●
: Search for available networks and
select a network for roaming.
Call
Customise the settings for calling features.
Call rejection
●
: Set to reject calls from specified phone
numbers automatically. You can add phone numbers to the
reject list.
► p. 46
Set reject messages
●
: Add or edit the message that will be
sent when you reject a call.
Call alert
●
:
Call status tones - : Activate or deactivate call connection
tone, minute minder tone, or call disconnection tone.
Alerts on call - : Set the device to alert you to events during
a call.
Call answering/ending
●
:
Answering key - : Set the device to answer calls by pressing
the Home key.
Automatic answering - : Set to answer automatically
after a specified period (available only when a headset is
connected).
The power key ends calls - : Set the device to end a call
when you press the Power key.
To Next Page
Loading...
