Samsung Heba WF8802 Series - Page 25

26 _ Removal and Reassembly
Part Figure Description
DOOR-LOCK S/W
1. OpentheDoor.
RemovetheWireDiaphragmandremoveit
fromTheFrontFrame.
 Foreasierdisassembly,removethe
springfromthelowerpartofthe
Diaphragmwitha(-)screwdriver.
 SincetheDiaphragmcanbedamaged
whenremovingit,removeitslowlyin
onedirection.
2. RemovetheASSY-CLAMPDIAPHRAGM.
3. Removethetwoscrews.
4. RemovethescrewholdingtheDoor-Lock
S/W.
RemovetheDoor-LockS/W.
Removetheconnectionwire.
(Removetheconnectorafterreleasingitby
pressingthecatch.)
WF-M592NMH-YLP.indb 26 2010-2-22 13:29:54