28
English
¦ Plug & Play
Hotel Plug & Play is a function that automatically performs the Hotel mode selection, Country Setup, Clock Setup and Picture
mode Setup once.
– Hotel Plug & Play is available only one time when power is first turned ON.
– After setting up first TV and Clone TV to USB
– Next TV only needs to exit Hotel Plug & Play, connect USB, then Clone USB to TV.
E E
E
If Standalone Only is selected
TV will enter the RF mode.
Standalone mode
is set.
If Standalone Plug & Play
is selected
<Depending on Region, this step may not exist.>
E
E
After Searching the channels.
Easy Set up
Next
After Plug & Play is
completed, TV will be set
to standalone mode.
Setup > Start
● Interactive
● Standalone Plug & Play
● Standalone Only
Select the language you want to use.
Next
Select English as the
menu language.
Setup > Menu Language
● Hrvatski
● Čeština
● Dansk
● Nederlands
● English
Select Country.
Next
Previous
Set the country to United
Kingdom.
Setup > Country
● Serbia
● Slovakia
● Slovenia
● Switzerland
● United Kingdom
Let's find and store channels on your
TV. How do you receive programming?
Next
Skip
Previous
Selecting Aerial cable
means all the channels
available through your
RF cable will be stored.
(Auto Tuning
necessary)
Setup > Auto Tuning (1/5)
● I use an aerial cable.
● I use a cable or satellite service.
Set Auto Tuning search options.
Digital &
Analogue
Digital Analogue
Air
● ● ●
Cable
● ● ●
Next
Skip
Previous
Setup > Auto Tuning (2/5)
Set the Clock Mode.
Set the current time
automatically using the
time from the digital
broadcast.
Select Picture Mode.
Next
Skip
Next
Previous
Previous
Setup > Clock (1/2)
Setup > Picture Mode
● Auto
● Dynamic
● Manual
● Standard
- After selecting the country in the country menu,
some models may proceed with an additional
option to setup the pin number.
- If you forget the PIN code, in the Hotel menu,
select the SERVICE -> TV Reset. And set the
pin code again in the Plug & Play.
[Hotel-XC]Install Guide-ENG.indd 28 2012-03-30 �� 1:27:58
To Next Page
Loading...
