3-1
3. Disassembly and Reassemble
3. Disassembly and Reassembly
This section of the service manual describes the disassembly and reassembly procedures for the LED TV.
WARNING
This LED TV contains electrostatically sensitive devices. Use caution when handling these components.
3-1. Disassembly and Reassembly
CAUTION
Disconnect the LED TV from the power source before disassembly.1.
Follow these directions carefully; never use metal instruments to pry apart the cabinet.2.
If there is no additional coment, it is same for all inches.3.
3-1-1. 24 inches
Description Picture Description Screws
1
Place a soft cloth over the table to
protect the TV, and then place the TV on
the cloth screen-side down.
2
Remove the screws from the ASSY
STAND P-BASE.
24" : 3EA•
6003-001782
SCREW-TAPTYPE
M4,L12,ZPC(BLK)
3
Remove the ASSY STAND P-BASE.
To Next Page
Loading...
