Samsung HG28EC690 - Connecting the RJP (Remote Jack Pack)

19
English
Connecting the RJP (Remote Jack Pack)
Output to any external source connected to RJP on the hotel desk.
1. Connect the PC IN / PC/DVI AUDIO IN port of the TV to the PC/AUDIO port of the RJP.
2. Connect the AV IN [VIDEO]/[L-AUDIO-R] port of the TV to the VIDEO port of the RJP.
3. Connect the AV IN [VIDEO] port of the TV to the VIDEO port of the RJP.
4. Connect the HDMI IN 1, 2(DVI) or 3 (ARC) port of the TV and the HDMI port of the RJP.
5. Connect the RJP port of the TV and the RS/232 port of the RJP.
✎ The RJP (Remote Jack Pack) compatible with this Samsung TV is TeleAdapt TA-7610, TA-7650 (HD) and TA-
7660 (HD Plus).
• R JP (Remote Jack Pack): RJP stands for Remote Jack Pack. The RJP is a hardware module that has different Audio
Video inputs (A/V, Audio, PC and HDMI) and corresponding outputs. The corresponding output sources are con-
nected from RJP to TV. The RJP communicates with the TV via RS232. Hot Plug & Play is a function that allows hotel
guests to connect an external source to the RJP. The RJP communicates with the TV by sending messages regarding
Active/Inactive sources. The TV will switch to the Active external source according to the priority set by the User.
✎ You can select HDMI IN 1, 2(DVI) or 3(ARC) and AV IN for connecting RJP.
✎ When the TV is on, connect the TV and the RJP within 10 seconds.
USB HDMI VIDEO
AUDIO AUDIO/PC
RS/232
TV Rear Panel
RJP Rear
5
1 D-sub / PC Audio cable
2 Audio Cable
3 Video Cable
4 HDMI cable