43
English
y FAQs
If SIRCH seems to have a problem, first review this list of possible problems and solutions.
y Test SIRCH modulator controller settings:
- The SIRCH upgrade only support OpenCable & DVB-C
- Recommended setting
- Parameters Constellation: 64 QAM
- Remux(H/W) : Off
- SIRCH Frequency should be matched SIRCH Channel of TV.
- If you change frequency table, please refer the frequency table in SIRCH manual (Appendix A).
- You should set same channel in both SIRCH PC program and in TV. For ex. if you have empty 2channel (57MHz) in
Hotel, you should set 2channel(57MHz) both SIRCH PC program and TV.
- Default initial value : SIRCH 87 (603MHz), TV SIRCH Channel : 87
To Next Page
Loading...
Need help?
General