25
English
Hotel TV Function
Description
Category Item initial value
Remote Jack Pack
Priority AV 1
If the jack priority is set, the corresponding source is automatically set when a
jack is inserted according to the jack priority
Priority PC 2
If the jack priority is set, the corresponding source is automatically set when a
jack is inserted according to the jack priority.
Priority HDMI 3
If the jack priority is set, the corresponding source is automatically set when a
jack is inserted according to the jack priority.
AV Option AV
Select RJP AV Source (Source selection depends on Model).
HDMI Option HDMI 1
Select which HDMI source of the TV is connected to the RJP jack. (HDMI1/
HDMI2/HDMI3)
External Source
USB Pop-up
Screen
Default
When USB is connected to the TV :
• Default : a Popup window appears.
• Automatic : This Enters the USB content menu automatically.
• Disable : Neither the popup window nor the menu appears.
External Source
Banner
ON
If set to On, the TV displays the External Source Banner (information) when you
change the TV source to another external input, press the Info key, or turn the
TV on.
• On : The External Source information is displayed on the TV screen.
• Off : The External Source information is not displayed on the TV screen.
Auto Source OFF
• On : When an external input source is connected to the TV, the TV identifies
the input source, and then automatically switches to that input source.
• Off : Auto Source function is Off.
• PC : Auto Ident PC Input only.
Anynet+ Return
Source
Power On
Src
Select the return TV source after stopping an Anynet+(HDMI-CEC) connection.
(This fuction is especially useful for the Guestlink RJP.)
Bathroom Speaker
Sub Amp Mode 2
Determines the Sub AMP operation mode.
• 0: Turns the Sub AMP function off (PWM off).
• 1: Determines the Sub volume according to the main volume control.
That is, the sub volume is determined according to the Power On Volume, the
Min Volume, and the Max
• 2: Determines the volume according to the bathroom control panel setting.
Sub Amp Volume 6 Sub AMP Volume level at power on initial condition.
Eco Solution Energy Saving Off
Adjusts the brightness of the TV to reduce power consumption.
• Off: Turns off the energy saving function.
• Low: Sets the TV to low energy saving mode.
• Medium: Sets the TV to medium energy saving mode.
• High: Sets the TV to high energy saving mode.
Logo/Message
Welcome Message
OFF Displays a the Welcome Message for 5 seconds when the TV turns On.
Edit Welcome
Message
Edits the Welcome Message.
Hospitality Logo OFF
Turns the Hospitality logo feature On or Off, If On, when the TV is turned on, the
Logo is displayed, before the signal from the initial source, for the amount of time
set in "Logo Display Time".
Hospitality Logo
DL
…
Downloads the Hospitality logo.
Hospitality logo file requirements:
• BMP or AVI files only.
• Max file size : BMP - 960 X 540. AVI - 30MB.
• The file can only be named samsung.bmp or samsung.avi.
Logo Display Time … Hospitality Logo Display Time (3/5/7 seconds).
Cloning
Clone TV to USB Clone the current TV options to a USB memory device.
Clone USB to TV Clone the saved TV options on a USB memory device to the TV.
Setting Auto
Intialize
OFF
When Setting Auto Initialize is set to On, and the power is turned off and on or
the Master Power is turned off and on, the data is restored to the cloned values.
If there is no cloned value, even when the Setting Auto Initialize is set to On, it will
be ignored and the operation will be the same as that whenSetting Auto Initialize
is set to Off
[HC690-EUROPE]Install Guide-X0ENG.indd 25 2014-04-08 11:20:42
To Next Page
Loading...
