26
English
Hotel TV Function
Description
Category Item initial value
REACH Soulution
REACH Server
Update Time
1hour Standby REACH Server will be operated, according to time setting
REACH Update
Immediate
OFF Make TV operate REACH Server after 1 minute in Stand-by mode.
REACH Server
Channel
…
Set the default channel for REACH Server
• None : After Auto Scan, Operate REACH Server
• Channel value : Operate REACH Server at the channel selected
REACH Server
Version
0000 Display REACH Server version of TV.
REACH Server
Group ID
All Provided REACH Server ID for operating REACH on a specific set.
REACH OFF Set whether to use REACH function.
Background TV
Sound
ON Background TV Sound On and Off.
TICKER OFF Ticker On and Off
App Lite
...
• On : The Applite content is displayed.
• Off : The Applite content is not displayed.
Room Number
Setting
… Set Room Number.
Network
Network Setup Connect to a wired or wireless network and access the Internet.
SmartHub Model
Setting
Set SmartHub Model.
SmartHub Setting Set up SmartHub.
Widget Solution
Widget Mode ON Widget Mode ON/OFF.
Solution Type
Vendor
Server
Select type of solution (Vender Server/ SINC Server).
Server URL Setting
Set server URL.
License Server IP
Setting
Set server IP.
IPTV Mode ON IPTV mode On/Off.
Virtual Standby OFF
Virtual Standby mode On/Off.
When Virtual Standby is On, TV power consumption will be 9.5W to 17.4W
(Depending on ithe size of the TV screen).
Instant On OFF Setup booting mode.
Room Num
Setting
Set Room Number.
System
Self Diagnosis
for TV
…
Enter Self Diagnosis Menu.
• Picture Test: Use to check for picture problems. If the problem appears in the
test picture, select Yes and follow the directions on the screen.
• S
ound Test: Use the built-in melody sound to check for sound problems. If the
problem occurs during the test, select Yes and follow the directions on the screen.
Self Diagnosis for
HTV
…
HD Function Check Menu On Executing Item Below OSD is displayed ProIdiom
DTV Channel Key Loss : Ok/Failure (Hotel US) STB SI Vendor
Setting : SI Name Ok/Failure
Bathroom AMP : Ok/Failure (Hotel EU)
RTC : Ok/Failure (Hotel EU)
PC Audio Test : Ok/Failure
PC Self Test : Ok/Failure
SW Update … SW USB Update function
Service Pattern OFF Same function with SVC Service Pattern
Sound Bar Out OFF
ON: TV speaker sound will be mute. Sound will come out through HDMI.
You must connect the Sound Bar to hear the sound.
OFF: Sound will come out through TV speakers normally.
TV reset Factory reset
[HC690-EUROPE]Install Guide-X0ENG.indd 26 2014-04-08 11:20:42
To Next Page
Loading...
