Samsung HG40ED890U - Connecting the MediaHub HD

19
English
Connecting the MediaHub HD
Output to any external source connected to MediaHub HD on the hotel desk.
RJP
VOL-CTRL
LAN
DVI
AUDIO IN
HDMI IN 2
HDMI IN 1
(DVI)
DIGITAL
AUDIO OUT
(OPTICAL)
HDMI IN 3
(ARC)
V
OL-CTR
L
LAN
D
VI
AUDI
O
IN
D
I
G
ITA
L
AU
DI
O
OU
T
(
OPTICAL
)
HDMI
USB RS/232
TV Rear Panel
MediaHub HD Rear
2 HDMI cable
1 RS-232
Data Cable
1. Connect the RJP port of the TV and the RS/232 port of the MediaHub HD.
2. Connect the HDMI IN 1(DVI), 2or 3(ARC) port of the TV and the HDMI port of the MediaHub HD.
•MediaHub HD
– The MediaHub HD is a hardware module that has different Audio Video inputs (A/V, Audio, PC, HDMI and USB)
and corresponding outputs. The corresponding output sources connect from MediaHub to the TV. MediaHub
communicates with the TV via RS232. Hot Plug & Play is a function that allows hotel guests to connect an external
source to the MediaHub. MediaHub communicates with the TV by sending messages regarding Active/Inactive
sources. The TV switches to the Active external source.
– You have to connect the HDMI of the MediaHub to the HDMI IN 1(DVI) port of the TV.
– When the TV is on, connect the TV and the RJP within 10 seconds.
• Special features
– PIP
– Auto Detection