Samsung HG40ED890U - Connecting the RJP (Remote Jack Pack)

20
English
Connecting the RJP (Remote Jack Pack)
Output to any exter nal source connected to RJP on the hotel desk.
RJP
VOL-CTRL
LAN
DVI
AUDIO IN
HDMI IN 2
HDMI IN 1
(DVI)
DIGITAL
AUDIO OUT
(OPTICAL)
HDMI IN 3
(ARC)
VO
L-
C
TR
L
LAN
D
I
G
ITAL
AU
DI
O
OU
T
(
OPTICAL
)
USB HDMI VIDEO
AUDIOAUDIO/PC
RS/232
TV Rear Panel
RJP Rear
5
1
D-sub Audio cable
2 Audio Cable
3 Video Cable
4 HDMI cable
1. Connect the DVI AUDIO IN port of the TV to the PC/AUDIO port of the RJP.
2. Connect the AV IN 1 [VIDEO]/[L-AUDIO-R] port of the TV to the VIDEO port of the RJP.
3. Connect the AV IN 1 [VIDEO] port of the TV to the VIDEO port of the RJP.
4. Connect the HDMI IN 1(DVI), 2 or 3(ARC) port of the TV and the HDMI port of the RJP.
5. Connect the RJP port of the TV and the RS/232 port of the RJP.
✎ The RJP (Remote Jack Pack) compatible with this Samsung TV is TeleAdapt TA-7610, TA-7650 (HD) and TA-7660
(HD Plus).
• RJP (Remote Jack Pack): RJP stands for Remote Jack Pack. The RJP is a hardware module that has different Audio
Video inputs (A/V, Audio, PC and HDMI) and corresponding outputs. The corresponding output sources are connected
from RJP to TV. The RJP communicates with the TV via RS232. Hot Plug & Play is a function that allows hotel guests
to connect an external source to the RJP. The RJP communicates with the TV by sending messages regarding Active/
Inactive sources. The TV will switch to the Active external source according to the priority set by the User.
✎ You can select HDMI IN 1 (DVI), 2 or 3(ARC) and AV IN for connecting RJP.
✎ When the TV is on, connect the TV and the RJP within 10 seconds.