Hotel TV Function
Description
Category Item Initial value
External
Source
USB Pop-up Screen Default
When USB is connected to the TV,
•Default : A Popup window appears.
•Automatic : This Enters the USB content menu automatically.
•Disable : Neither the pop-up window nor the menu appears.
External Source
Banner
ON
Users can set External Source Banner to On or Off.
•ON : When TV power is On or the Mode changes, the TV will displays the external
source banner.
•OFF : When TV power is On or the Mode changes, the TV does not display the
external source banner.
Auto Source OFF
•OFF : Auto Source is Off.
•ON : When an external source is connected to the TV, the TV will auto-ident and
switch the input source.
•PC : Auto Ident PC Input only.
Anynet+ Return
Source
Power On
Src
Select the return TV source after stopping an Anynet+(HDMI-CEC) connection. (This
fuction is especially useful for the Guestlink RJP.)
Bathroom
Speaker
Sub AMP Mode 2
Determines the Sub AMP operation mode.
•0: Turns the Sub AMP function off (PWM off).
•1: Determines the Sub volume according to the main volume control.
That is, the sub volume is determined according to the Power On Volume, the Min
Volume, and the Max
•2: Determines the volume according to the bathroom control panel setting.
Sub AMP Volume 6 Sub AMP Volume level at power on initial condition.
HP
Management
HP Mode OFF
•ON: When the Headphone is connect to the TV, allows you to listen to audio through
the TV's speakers and the connected headphones simultaneously. But, you can only
adjust the volumes of TV speaker.
•OFF: When the Headphone is connect to the TV, allows you to listen to audio through
the connected headphones only.
Default HP Volume 10 Configure the values of headphones' volume when HP MODE is set to ON.
Main Speaker ON
•ON: Plays the TV sound through the TV speaker.
•OFF: Plays the TV sound through the headphones only.
Eco Solution Energy Saving Off
Adjusts the brightness of the TV to recduce power consumption.
•Off: Turns off the energy saving function.
•Low: Sets the TV to low energy saving mode.
•Medium: Sets the TV to medium energy saving mode.
•High: Sets the TV to high energy saving mode.
Logo/
Message
Welcome Message OFF displays on Welcome Message.
Edit Welcome
Message
Edit the Welcome Message.
Hospitality Logo OFF
Turns the Hospitality logo feature On or Off, if On, when the TV isturned on, the Logo is
displayed, before the signal from the initial source, for the amount of time set in "Logo
Display Time"
Hospitality Logo DL ...
Downloads the Hospitality logo.
Hospitality logo file requirements:
•BMP or AVI files only.
•Max file size : BMP - 960 X 540. AVI - 30MB.
•The file can only be named samsung.bmp or samsung.avi.
Logo Display Time ... Set the logo display time (3/5/7 Seconds).
Cloning
Clone TV to USB Clone the current TV option values to a USB memory device.
Clone USB to TV Clone the saved TV option values in a USB memory device to the TV.
Setting Auto Initialize OFF
When Setting Auto Initialize is set to On, and the power is turned off and on or the
Master Power is turned off and on, the data is restored to the cloned values. If there is
no cloned value, even when the Setting Auto Initialize is set to On, it will be ignored and
the operation will be the same as that whenSetting Auto Initialize is set to Off
To Next Page
Loading...
