Key Guide
Button Action Nav. Help
ENTER Applies the changes and closes the window. Enter
RETURN Cancels and returns to the previous screen (Tools). Return
U/D Changes the channel number of the selected channel. Adjust
0~9 Enters a digit. Number
INFO N/R N/R
TOOLS Closes the current window and displays the ‘Tools’ menu. (No Guide)
EXIT Cancels and returns to the previous step (Factory Mode). (No Guide)
✎ NOTE
• This is the function that changes the channel number. (Swap Type)
• Channel numbers can be changed in all the channel lists and changes are applied to all the channels.
• If the new channel number has not been allocated to another channel, the channel number is updated to the new
channel number and the list is sorted again in ascending order of channel number.
• If the new channel number has already been allocated to another channel, follow the Hotel specifications.
✎ ETC.
• Vertical circulation is supported.
Elements
No Name Description
1
Edit Channel
Number Window
•Both the numeric keys and the Up/Down keys are supported.
– Selected Channel: Shows the currently selected channel name.
– Number: Shows the new channel number.
(The currently allocated channel name is also displayed.)
– Name: Shows the currently allocated channel name. (If there are no
channels, it is displayed as “(Empty)”.) : If there is a channel but it does
not have a name, the name is represented as “-----”.
2
Warning
Message
•If an already allocated channel is selected
– If the new channel number has already been allocated to another
channel, the confirmation message pops up. (Refer to the figure
below.)
– If the user wants to change the channel number to one that has
already been allocated to another channel, the channel numbers are
swapped and saved.
To Next Page
Loading...
