To Next PageTo Next PageWhat to do if there is mechanical fault in Samsung Camcorder?
If your Samsung Camcorder has some mechanical fault: 1. Eject the tape. 2. Set to OFF. 3. Detach the battery. 4. Reattach the battery.
Why does my Samsung Camcorder go off automatically?
You may have left the Samsung Camcorder set to STANDBY for more than 5 minutes without using it or the battery pack is fully used up.
What to do if Samsung Camcorder tape reached its end?
If the tape in your Samsung Camcorder has reached its end, change to a new one.
What to do if Samsung Camcorder tape has almost reached its end?
If the tape in your Samsung Camcorder has almost reached its end, prepare a new one.
Why is the playback picture quality poor on my Samsung Hi8 8 VP-L630?
The video heads might be dirty on your Samsung Camcorder.
Why is the LCD image poor on my Samsung Hi8 8 VP-L630?
When shooting in bright sunlight, it is recommended to use the VIEWFINDER. You can also adjust the LCD of your Samsung Camcorder.
Why is there no sound from the SPEAKER when playing back tape on my Samsung Hi8 8 VP-L630?
Make sure the SPEAKER is turned ON on your Samsung Camcorder.
Why Start/Stop does not operate while shooting with my Samsung Hi8 8 VP-L630 Camcorder?
Check that the POWER is set to CAMERA. Ensure you have not reached the end of the cassette. Also, check the record protection tab on the cassette.
What to do if Samsung Hi8 8 VP-L630 Camcorder tape is protected from recording?
If the tape is protected from recording on your Samsung Camcorder, check the red tab on the tape to ensure it is not pushed over the hole.
What to do if there is no tape in Samsung Camcorder?
If there is no tape in your Samsung Camcorder, insert a tape.
General| Optical Zoom | 16x |
|---|---|
| LCD Screen Size | 2.5 inches |
| Weight | 1.1 kg |
| Focus | Auto/Manual |
| LCD Screen | Yes |
| Recording Medium | Video8 |
| Image Sensor | CCD |
| Viewfinder | Color |
| Microphone | Built-in |
Instructions on safely rotating the LCD screen to avoid hinge damage.
Warning against pointing the lens directly at the sun to prevent CCD damage.
Warnings about handling the viewfinder and pointing it towards the sun.
Guidance on preventing and handling condensation inside the camcorder.
Tips on battery usage, charging, and care for optimal performance.
Warnings and information about the lithium battery for clock and memory functions.
Advice on using the LCD display for recording and playback, including visibility.
Importance of correctly adjusting the hand strap for stable shooting.
Guidance on cleaning video heads to ensure picture quality.
Explanation of the auto power-off feature to save battery and protect tape.
Overview of the camcorder's various functions available during recording or playback.
Identification and explanation of the camcorder's front-facing controls and components.
Identification and explanation of the camcorder's side-facing controls and components.
Identification and explanation of the camcorder's rear-facing controls and components.
Explanation of on-screen display elements in CAMERA mode.
Explanation of on-screen display elements in PLAYER mode.
List of basic and optional accessories included with the camcorder.
Details on the remote control's buttons, self-recording features, and battery installation.
Instructions for adjusting straps for stable handling and comfortable use.
How to attach and adjust the shoulder strap for carrying the camcorder.
Steps for installing the lithium battery for clock and memory functions.
Guide to connecting the camcorder to AC power for indoor recording.
Information on using the battery pack for mobile and outdoor recording.
Step-by-step guide on how to recharge the camcorder's battery pack.
Table showing continuous recording times based on model and battery type.
How to interpret the battery level indicator and identify charge status.
Procedures for inserting and ejecting video cassettes, including protection.
Initial preparations and steps to begin recording for the first time.
How to stop recording and use the edit search function for recorded footage.
Techniques for holding the camcorder steady for stable video footage.
Steps and tips for recording using the LCD screen and viewfinder.
How to adjust the brightness and color settings of the LCD display.
Instructions on how to adjust the focus for the viewfinder image.
Steps to view recorded tapes on the camcorder's LCD screen.
Adjusting LCD, speaker, and using picture search features during playback.
Guide to using the zoom function for magnification during recording.
Explanation of digital zoom, its limits, and how to activate/deactivate it.
Instructions for enabling or disabling the digital zoom feature.
How to use the EASY mode for simplified recording operations.
Guide to creating and saving personalized recording settings using CUSTOM mode.
Explanation of the Digital Image Stabilizer for reducing camera shake.
How to use and switch between manual and automatic focus modes.
Situations where manual focusing provides better results.
How to use BLC to improve image quality when shooting against bright backgrounds.
Overview of the six automatic exposure modes for different shooting conditions.
Steps to select and set the desired Program AE mode.
Introduction to digital special effects for creative filming.
How to select and apply digital special effects during recording.
Guide to setting and recording date and time information on recordings.
Detailed steps for setting the camcorder's internal clock.
How to choose whether to record date, time, or both on the footage.
How to select preset titles and choose the display language.
Steps for changing the language for titles and selecting a title.
Procedure for recording a selected title onto the video footage.
How to use fade-in and fade-out effects for professional transitions.
Steps to initiate and conclude fade-in and fade-out sequences.
How to use the PIP feature with digital zoom for a secondary view.
How to take single still pictures using the Snap Shot feature.
Guide to setting white balance for accurate color reproduction in different lighting.
Steps to select AUTO, INDOOR, or OUTDOOR white balance modes.
How to activate the demonstration mode to showcase camcorder functions.
Recommendations for lighting conditions and the use of video lights for optimal recording.
Options for viewing recorded tapes on the LCD or a TV monitor.
How to connect the camcorder to a TV using audio/video input jacks.
Steps for playing back tapes, including connecting to TV and controlling playback.
Using still picture mode, picture search, and zero return features in player mode.
Adjusting the LCD display and controlling speaker volume during playback.
Information on using Digital Special Effects in player mode.
Instructions for cleaning the camcorder's viewfinder eyepiece.
Steps for gently cleaning the camcorder's LCD screen.
Procedure for cleaning video heads using a dry head cleaning tape.
Guidelines for safely storing the camcorder when not in use.
Information on power compatibility and TV color systems for international use.
Explains the meaning of various display codes for camcorder self-diagnosis.
Solutions for common problems like failure to switch on or automatic shutdown.
Addresses issues with image quality, viewfinder focus, sound, and date/time display.
Guidance on managing moisture condensation and its effects on the camcorder.
