Disassembly & Reassembly
Samsung Electronics 12-3
12-1-2 Separation of the Analog and Digital Board
Part Name Description Description Photo
Analog
Board
① Seperate the cables.
: The 30 pin shield cable should be removed by holding the
two lock ends of the cable, as failing to do so, could damage the
connector.
① Remove the 5 screws and separate Fan cable(CN275).
Detach Analog board from Assy.
: PWH,B,M3,L10,ZPC(YEL),SWRCH18A
Fan
① Remove both the connector and the screws before removing
the fan. Then remove the fan from the holder chassis.
: PWH,B,M3,L10,ZPC(YEL),SWRCH18A
Analog
Board/
Digital
Board/
Fan
① Analog, Digital Board and Fan.
To Next Page
Loading...
