Samsung HT-BD1220 - Setting up the Video Display;Output Options

Display setup
42
SETTING UP THE VIDEO DISPLAY/OUTPUT OPTIONS
Resolution according to the output mode
Blu-ray Disc playback
Output
Setup
HDMI
Component
(HDMI&Comp. connected / Comp.
connected only)
VIDEO
1080p, Movie Frame(24Fs)
off
1080p@60F 1080i 576i(480i)
1080p/1080i, Movie
Frame (24Fs) on
1080p@24F 576i(480i) / 1080i 576i(480i)
1080i, Movie Frame (24Fs)
off
1080i 1080i 576i(480i)
720p 720p 720p 576i(480i)
576p(480p) 576p(480p) 576p(480p) 576i(480i)
576i(480i) 576p(480p) 576i(480i) 576i(480i)
DVD playback
Output
Setup
HDMI
Component
(HDMI&Comp. connected / Comp.
connected only)
VIDEO
1080p 1080p@60F 576i(480i) / 576p(480p) 576i(480i)
1080i 1080i 576i(480i) / 576p(480p) 576i(480i)
720p 720p 576i(480i) / 576p(480p) 576i(480i)
576p(480p) 576p(480p) 576i(480i) / 576p(480p) 576i(480i)
576i(480i) 576p(480p) 576i(480i) 576i(480i)
In DVD playback, if both HDMI and Component jacks are connected and you select the
Component 1080p, 1080i or 720p mode, the Display Setup menu will show the output
resolution as 1080p, 1080i or 720p in the menu.
The resolution is actually 576i(480i).
This player has the HDMI Auto Detect Feature. When the player is fi rst connected to a TV
via HDMI, the player's output will be set automatically to HDMI.
If the HDMI Auto Detection feature does not work, you can't select the 1080p resolution or
Movie Frame (24Fs).
The Blu-ray Disc must have the 24 frame feature in order to use the Movie Frame (24Fs)
mode.
•
•
M




HT-BD1220A_ELS_0729-2.indd 42HT-BD1220A_ELS_0729-2.indd 42 2009-07-29  4:19:322009-07-29  4:19:32