Samsung HT-BD1250 - Page 104

4 Connectioglhe video out to 'tour tv
Choose one of the three methods for connecting to alV.
METHOD3 METHOD2 METHOD1
(supplied)
TV
METHOD 1 : HDMI (BES1)
Connect the HOM I cable (not supplied) from the HOMI OUT jack on the back of the Blu-ray Home Theater to the HOMI IN jack on your lV.
METHOD 2 : Component Video=--.:(B=E::..cI.:...::1 E"-'H)'--- . __ . _
If your television is equipped with Component Video inputs, connect a Component video cable (not supplied) from the Component Video
Output (Pr, Pb and Y) Jacks on the back of the Blu-ray Home Theater to the Component Video Input Jacks on your lV.
METHOD 3 : Com osite Video (Goo01
Connect the supplied Video cable from the VIDEO OUT jack on the back of the Blu-ray Home Theater to the VIDEO IN jack on your lV.
(EJ • Depending on your 1V, certain HOMI output resolutions may not work.
• If an HOMI cable is connected from the player to a 1V, the Blu-ray Home Theater's output is set to
HOMI automatically within 10 seconds.
• If Component and HOMI are both connected, HOMI mode is automatically selected.
• When you connect the player to the 1V using the HOMI cable for the first time or to a new 1V, the
HOMI output resolution will be automatically set to the highest provided by the 1V.
• If you connect a Sam sung 1V to the Blu-ray Home Theater using an HOMI cable, the player can be easily
operated using the 1V remote control.
(This is only available with Samsung 1Vs that support the Anynet+ feature.)
• If the HOMI cable is connected or removed during playback of a CODA, MP3 or JPEG file, the player will stop
playing.
• After making the video connection, set the Video input source on your 1V to match the Corresponding Video
output (HOMI, Component or Composite) on your Home theater.
See your 1V owner's manual for more information on how to select the 1V's Video Input source.
• The actual resolution may differ from the setting in the SETUP menu if both Component and HOMI cables are
connected. The resolution may also be different depending on the disc.
• If the resolution is set to 'i' (ex: 480i or 1 080i), the output is displayed in 30 frames per second and if set to 'p'
(ex: 480p, 720p, 1080p), it will be displayed in 60 frames per second.
i : interlaced mode (30 frames) p : progressive mode (60 frames)
O' English