26
Connections
CONNECTING AN
iPod
You can enjoy music, video fi les from an iPod through the main unit. For iPod operation with this Blu-ray home
theater, see pages 27 and 80 ~ 82.
GConnect the iPod Dock to the iPod Jack on the rear side of the main unit.
Place the iPod in the dock.
“iPod Connected” message appears on the TV screen.
You must have the VIDEO output connected to your TV to view iPod video (See page 25).
As the cable ports are close together, be sure to remove the USB memory drive before
disconnecting the ipod docking cable.
Adjust the volume to a moderate level before you connect your iPod and Blu-ray home theater.
When the unit is powered on and you connect an iPod, the unit will charge your iPod's battery.
Make sure to connect the dock connector so that the label “SAMSUNG” faces upward.
“Made for iPod” means that an electronic accessory has been designed to connect
specifi cally to iPod and has been certifi ed by the developer to meet Apple performance
standards.
1.
2.
•
M
(supplied)
HT-BD1250_XAA_0207-1.indd 26 2009-02-07 10:53:35
To Next Page
Loading...
