Samsung HT-BD1250 - Page 106

6 Listenin-Q to radio
Connecting the FM Antenna
1. Connect the FM antenna supplied to the FM 750 COAXIAL Jack.
2. Slowly move the antenna wire around until you find a location where reception is good, then fasten it to a wall or other rigid
surface.
FM Antenna(supplied)
FM ANT
FM 75 Gr-rn>.._
e~ __ I-----
@
rEJ • This unit does not receive AM broadcasts.
Listening to Radio
Remote Control
1. Press the TUNER button to select the FM band.
2. Tune in to the desired station .
•
Automatic Tuning 1 : When the SKIP (El El) button is pressed, a preset broadcast station is selected.
• Automatic Tuning 2 : Press and hold the
TUNING/CH ("" "') button to automatically search for active broadcasting stations.
• Manual Tuning: Briefly press the TUNING/CH ("""') button to increase or decrease the frequency incrementally.
Main Unit
1. Press the FUNCTION button to select the FM band.
2. Select a broadcast station .
•
Automatic Tuning 1 : Press the STOP (.) button to select PRESET and then press the SKIP (El El) button to select
the preset station.
• Automatic Tuning 2: Press the STOP (.) button to select MANUAL and then press and hold the SKIP (El El)
button to automatically search the band.
• Manual Tuning: Press the STOP (.) button to select MANUAL and then briefly press the SKIP (El El) button to tune
in to a lower or higher frequency.
0- English
AH68-02183F