.--- SWA-5000
TX Card Wirebss Receiver ModuD Speaker Cabb (2EA)
Removing/installing the speaker on the stand
* Front Speakers only
How to remove the speaker
Ifyou attach the speaker on the wall, remove the stand
before using it.
1, Pull out the stand in the arrow direction as shown,
Be careful not to put excessive force when removing it,
Othen_!ise, it can be damaged,
2, This is the appearance after the stand is removed,
How to install the s_aeaker
1. Connect the stand in the arrow direction so that it fits the
corresponding holes (x4) on the speaker,
2. Fully insert the stand in the arrow direction as shown,
3. This is the appearance after the speaker unit is installed,
@
English 2"1
To Next Page
Loading...
