Setting Mono/Stereo ..........................................................................................
Press the MO/ST button. MOST
Each time the button is pressed, the
sound switches between STEREO
and MONO.
In a poor reception area, select
MONO for a clear, interference-free reception.
Presetting Stations
Example : Presetting FM 89.10 into memory
1. Press the FUNCTION button to select FM.
2. Press the TUNING/OH (^v) button to select
<89.10>.
3. Press the TUNER MEMORY button. TUNER
r_lEt_lORv
NUMBER flashes on the display.
4. Press the 1_4 _1 button to select
preset number.
You can select between 1 and 15
presets.
5. Press the TUNER MEMORY button again.
Press the TUNER MEMORY button before
NUMBER disappears from the display
NUMBER disappears from the display and
the station is stored in memory.
6o To preset another station, repeat steps 2 to 5
To tune into a presetstation,pressthe 14__l
button on the remotecontrolto selecta channek
You can enjoymusicand videorilesfrom an iPod
through the product,
Listening to Music
You can play music files stored in the iPod player by
connecting it to the product.
1. Connect the iPod dock connector to the iPod
jack on the rear panel of the product.
2. Place the iPod in the supplied iPod Dock.
Your iPod is automatically turned on.
"iPod" message appears on the TV screen.
3. Press the RED (A) button.
4. Press the A T buttons to select iPod, then press
the ENTER button.
5. Press the _ _ buttons to select Music, then
pressthe ENTER button.
6. Select the music file to play.
- You can use the remote control or product to
control simple playback functions such as the
PLAY, PAUSE, STOP, 14_/_l, _/_ and
REPEAT buttons. See page 18.
EngJish _
To Next Page
Loading...
