Setup
Software Upgrade ..........................................................................
This menu allows you to upgrade software for
performance improvements or additional services,
You can check the current software version,
upgrade on the Internet and set the Auto upgrade
notification, If the product is properly connected to
the network by cable or wirebssly, the product will
automatically connect to our website each time it is
turned on and download update files if any valid
upgrade exists.
1. To select By Intemet, press the ENTER
button.
A popup message appears if an update is
available asking if you want to upgrade.
2. If you select Yes, the product turns off
automatically before restarting, and then
begins the upgrade. (Never turn it on
manually here.)
3. The update progress popup appears.
When the update is completed, the product
turns off automatically again.
4. Press the POWER button to turn on the
product.
_ NOTE
_ The Update iscomplete when the product turns
off after restarting, Pressthe POWERbutton to
turn on the updated product for your use, Never
turn the product off or on manuallyduring the
update process.
_ Samsung Electronics shalltake no legal
responsibiJityfor product malfunction caused by
an unstabb internet connection or consumer
negJigenceduring software upgrade,
You can also update software in two other ways:
USB : Visit '_ww.samsung.com/bluraysupport,
then download and store the latest software
(RUF file) onto a USB flash drive. Connect the
USB flash drive to the USB port of the product
(disc tray must be empty) to update the
software, then follow the on-screen
instructions.
,, CD : Visit _vww.samsung.com/bluraysupport,
download and write the latest software (RUF
file) onto a disc. Insert and play the disc in the
product to start the update, then follow the
on-screen instructions.
NOTE
_ Software upgrades using the USB Host jack
must be performed with no disc inside,
_ If you want to cancel the upgrade during the
process of downloading the upgrade data,
press the ENTERbutton,
_ When the system upgrade is done, check the
software details in the software Upgrade
menu,
_s Do not turn off the product during the System
Upgrade, It may cause the product to not
work properly
_s Do not use USB devices other than USB Flash
Drives to do software upgrades when using
the USB Host jack,
Contact Samsung
Provides contact information for assistance with
your product.
4'6 EngJish
To Next Page
Loading...
