HDMI JN • Connecting to an External Component with an HDMI Cable
1. Connectan HDMIcable (notsupplied)fromthe HDMI INjack on the back ofthe product to the HDMI OUTjack
on your digitaldevice.
2. Pressthe FUNCTION button to select HDMI. IN1or HDMI. IN2 input.
The mode switches as follows : BD/DVD ._ D. IN ._ AUX ._ HDMI. IN1 ._ HDMI. IN2 ._ FM
HDMI Auto Detection Function
Ifyou have connected your home theater by HDMI cable, the home theater's video output
automatically switches to the HDMI mode when you turn it on. For available HDMI video resolutions,
see page 34.
This function is not available if the HDMI cable does not support CEC.
HDMI connection description
- HDMI outputs only a pure digital signal to the -IV.
- If your TV does not support HDCP, random noise appears on the screen.
What is the HDCP?
HDCP(High--bandwidth DigitalContent Protection)isa system for preventingBD/DVD content ou[pu[ted via
HDMIfrom beingcopied. Itprovides asecure digitallink between a video source (PC,DVD.e[c) and adisplay
device_, projector, e[c).Con[ent isencrypted at the sourcedevice to preventunauthorizedcopies from being
made.
! CAUTION
_ TheAnynet+functionissupportedonlywhenanHDMICableisconnectedtotheHDMIOUTof the
product.
FM Antenna (supplied)
1. Connect the FM antenna supplied to the
FM 750 COAXIAL jack.
2. Slowly move the antenna wire around until
you find a location where reception is good,
then fasten it to a wall or other rigid surface.
_-_ NOTE
_s This product does not receive AM
broadcasts.
English 25
To Next Page
Loading...
