Samsung HT-C6900W - Page 27

OpticalCable
(notsupplied)
White
AudioCable
(notsupplied)
Iftheexternalanalog
componenthasonlyone
AudioOutconnecteither
leftorright.
OPTICAL AUX
OPTICAL • Connecting an External Digital Component
Digital signal components such as a Cable Box/Satellite receiver (Set-Top Box).
1. Connect the Digital Input (OPTICAL) on the product to the Digital Output of the external digital
component.
2. Press the FUNCTION button to select DJN input.
The mode switches as follows : BD/DVD -_ D. IN -_ AUX -_ HDMI. IN1 -_ HDMI. IN2 -_ FM
_ NOTE
_ To see videofrom your Cable Box/Satellite receiver, you must connect it's video output directly to a _v'.
_ This system supports Digital sampling frequencies of 32 kHz of higher from external digital components.
_ Thissystem supportsonly DTSand Doby Digitalaudio,MPEGaudio(bit stream)is not supported
AUX : Connect!ng an External Analog Component
Analog signal components such as a VCR.
1. Connect AUX IN (Audio) on the product to the Audio Out of the external analog component.
Be sure to match connector colors.
2. Press the FUNCTION button to select AUX input.
The mode switches as follows : BD/DVD -_ D. IN -_ AUX -_ HDMI. IN1 -_ HDMI. IN2 -_ FM
_ NOTE
_ You connect the Video Output jack of your VCR to the TV,and connect the Audio Output jacks of the
VCR to this product.
English 27