Setup
1. Turn on your TV after connecting the product,
5tVhenthe product isconnected to TVfor the first
time, the product will turn on automaticallyand
display the InitialSettings screen,)
7, Press the _ _ buttons to select the desired
Network Settings :Wired, Wireless or PBC
(WPS), and then press the ENTER button.
Ifyou do not know your Network Settings,
press the BLUE (D) button on your remote
instead to skip Network Settings here, finish the
Initial Settings, and go to the Home menu. If
you selected a Network Setting, go to pages
3%42 for more information about the Network
settings, When done, go to Step 8.
2. Press the A T buttons to select the desired
language,then press the ENTER button,
3. Press the ENTER button to Start,
4. Press the A _' buttons to select the desired T',/
aspect ratio, then pressthe ENTER button,
(Seepage 33)
The Musical Room CaJibrationscreenappears.
5. Plugthe ASO microphone intothe ASC JNjack
on the product, (See page 37)
6. Press the ENTER button to Start,
8. Press the OK button,
The home menu appears, (For more information
about home menu, please see page 31)
Home Menu
SettingtheMusicalRoomCalibrationfunction
takesabout3 minutes.
30 EngJish
NOTE
*_ When the product is connected to 7',7for the
first time, the product wiJlturn on automatically.
This is not a malfunction,
_, The home menu will not appear if you do not
configure the initial settings, with the exception
below.
_ If you press the BLUE(I]) button during the
Musical Room Calibration or Network setup,
you can access the home menu even if the
network setup is not completed yet.
_ When you return to the home menu, the full
screen mode is cancelled automatically,
To Next Page
Loading...
