Samsung HT-D6750W - Connections: Wiring and HDMI; Connecting The Speakers

English 19
02 Connections
Connecting The Speakers
Press down the terminal tab on the back of the speaker.
Insert the black wire into the black terminal (–) and the red wire into the
red (+) terminal, and then release the tab.
Connect the connecting plugs to the back of the product by matching
the colors of the speaker plugs to the speaker jacks.
With the product turned off, insert the TX card into the TX Card
Connection (WIRELESS) on the back of the product.
Hold the TX card so that the label "WIRELESS" faces upward and
insert the card into the port.
The TX card enables communication between the product
and the wireless receiver module.
Connect the left and right surround speakers to the wireless
receiver module.
Plug the power cord of the wireless receiver module into the
wall outlet.
Turn on the product. The product and wireless receiver
module will now communicate with each other and you will
hear sound from the Surround speakers.
1.
2.
3.
4.
•
•
5.
6.
7.
Black
Red
FM ANT
WIRELESS
VID
E
AUX IN
COMPONENT OUT
TX card
FRONT FRONT TOP
SPEAKERS OUT
VIDEO OUTN
SUBWOOFER
CENTER FRONT
FRONT TOP
PONENT OUT
SPEAKER IMPEDANCE : 3
FRONT FRONT TOP
SPEAKERS OUT
SUBWOOFER
CENTER FRONT
FRONT TOP
SPEAKER IMPEDANCE : 3
Front/Front Top
Speaker (R)
Subwoofer
Centre Speaker
Wireless Receiver Module
Surround
Speaker (L)
Front/Front Top
Speaker (L)
Surround
Speaker (R)
This product should be connected with the SWA-5000 only.
HT-D6750W_XY_0221.indd 19HT-D6750W_XY_0221.indd 19 2011-03-17  1:47:282011-03-17  1:47:28