23
1
2
Connecting the FM Antenna
FM antenna connection
Connect the FM antenna supplied to the FM 75Ω COAXIAL terminal as a temporary
measure.
Slowly move the antenna wire around until you find a location where reception is
good, then fasten it to a wall or other rigid surface.
Press and hold NTSC/PAL button on the remote controller for over 5 seconds while the power is turned off.
•
"NTSC" or "PAL" will appear in the display.
At this time, press the NTSC/PAL button shortly to select between "NTSC" and "PAL".
•
Each country has a different video format standard.
•
For normal playback, the video format of the disc must be the same as the video format of your TV.
Selecting the Video Format
1p~44p(DS1000)-GB 9/16/04 9:14 AM Page 26
To Next Page
Loading...
