Samsung HT-P30 - Connecting to TV; Composite Video Connection; S-Video Connection; Component Video Connection

13
VIDEO
IN
COMPONENT
IN
TV
S-Video
•
When the Progressive scan mode is selected, the VIDEO and S-VIDEO
outputs do not feed any signal.
Note
METHOD 1
METHOD 3
METHOD 2
Choose one of the three methods for connecting to a TV.
Connecting the Video Out to TV
METHOD 1 Composite Video
...............
Good Quality
Connect the supplied video cable from the VIDEO OUT jack on the back panel of the
system to the VIDEO IN jack on your television.
METHOD 3 Component (Progressive Scan) Video
...............
Best Quality
If your television is equipped with Component Video inputs, connect a component video
cable (not supplied) from the Pr, Pb and Y jacks on the back panel of the system to the
corresponding jacks on your television.
METHOD 2 S-Video
...............
Better Quality
If you television is equipped with an S-Video input, connect an S-Video cable (not supplied)
from the S-VIDEO OUT jack on the back panel of the system to the S-VIDEO IN jack on
your television.
*
Depending on your TV, Component Video input connectors may be marked as DVD Video input connectors.