15
Connecting External Components
Connect Audio In on the DVD player to Audio Out on the external analog component.
•
Be sure to match connector colors.
2
Analog signal components such as a VCR or TV.
Press AUX on the remote control to select ‘DIGITAL IN / AUX’.
•
Each time the button is pressed, the selection changes as follows: DIGITAL IN ➝ AUX1➝ AUX2.
•
You can also use the FUNCTION button on the main unit.
The mode switches as follows: DVD/CD ➝ DIGITAL IN ➝ AUX 1 ➝ AUX 2 ➝ FM ➝ AM.
Connect the Digital Input (OPTICAL) to the Digital Output on the external digital component.
1
3
Example: Digital signal components such as a Set-Top Box or CD Recorder.
Connecting an External Digital
/ Analog
Component
Optical Cable
(not included)
Audio Cable
(not supplied)
If the external analog
component has only one
Audio Out, connect either left
or right.
To Next Page
Loading...
