4-1 Samsung Electronics
4. Adjustments
DVD flash Initialization & Update
●
Checking out MICOM &MPEG flash Version
1) Play DVD-DISC or CD-DISC,
2) Open DISC-TRAY, Press ‘MENU’ button on the Remote Control,
3) Press '8', '9', '5' one by one, then press ‘ENTER’.
●
DVD flash Initialization &Update (firmware)
1) Prepare DISC-CD, DVD or the USB device that contains HEX file for Update.
2) Play the DISC or connect the USB cable, then ‘Updating’ will appear on the screen,
then Power will go on and out.
3) Then DISC-TRAY will OPEN, then remove DISC or take off USB cable,making Unit
'NO DISC' state.
4) Press ‘STOP’ button of Main Unit 5 seconds more, Display Indicator shows ‘INITIALIZE’
then Power go out.
5) Initialization complete.
Connecting USB TV Display (On Updating) Update start
To Next Page
Loading...
