Samsung HT-X810 - Connecting Audio from External Components; Connecting Audio via AUX1, AUX2, and Optical

5 connecting audio from external components
AUX1 : Connecting an External ComponentlMP3 player
Components such as an MP3 Player.
1. Connect AUX IN 1 (Audio) on the Home Theater to the Audio Out of the external
componentlMP3 player.
2. Press the AUX button on the remote control to select AUX1 input.
• You can also use the FUNCTION button on the main unit.
The mode switches as follows :
DVD/CD -. D.IN AUX 1 --+ AUX 2 --+ USB --+ BT AUDIO -. FM.
AUX2 : Connecting an External Analog Component
Analog signal components such as a VCR.
1. Connect AUX IN 2 (Audio) on the Home Theater to the Audio Out
of the external analog component.
• Be sure to match connector colors.
2. Press the AUX button on the remote control to
select AUX 2 input.
• You can also use the FUNCTION button on the main unit.
The mode switches as follows :
DVD/CD D.lN --+ AUX 1 • AUX 2 USB BT AUDIO •
FM.
~ You can connect the Video Output jack of your VCR to
the W, and connect the Audio Output jacks of the VCR
to this product.
OPTICAL: Connecting an External Digital Component
Digital signal components such as a Cable Box/Satellite receiver (Set - Top Box).
1. Connect the Digital Input (OPTICAL) on the Home Theater to the
Digital Output of the external digital component.
2. Press the AUX button on the remote control to select DIGITAL IN.
• You can also use the FUNCTION button on the main unit.
The mode switches as follows :
DVD/CD -. D.IN • AUX 1 • AUX 2 --+ USB • BT AUDIO •
FM.
0- English
Audio Cable (not supplied)
I the ex ernal analog component
has only one Audio Out, connect
either left or right
Extemal Analog Component
Exterr 31 0191ta Component