Samsung HT-X810 - Listening to Radio; FM Antenna Connection and Tuning

6 listeninQ- to_radio
Connecting the FM Antenna
RADIO ANT
FM7SU
FM Antenna
(supplied)
1. Connect the FM antenna supplied to the FM 750 COAXIAL Jack.
2. Slowly move the antenna wire around until you find a location where reception is good, then fasten it to a wall or
other rigid surface.
Listening to Radio
Remote Control
1. Press the TUNER button to select the FM band.
2. Tune in to the desired station.
• Automatic Tuning 1 : When the I~."I button is pressed. a preset broadcast station IS selected.
• Automatic Tuning 2 : Press and hold the /\. V button to automatically search for active broadcasting stations.
• Manual Tuning: Briefly press the /\. V button to increase or decrease the frequency incrementally.
Main Unit
1. Press the FUNCTION button to select the FM band.
2. Select a broadcast station.
• Automatic Tuning 1 : Press the STOP (.) button to select PRESET and then press the I~,'" button to select the
preset station.
• Automatic Tuning 2 : Press the STOP (.) button to select MANUAL and then press and hold the '~,"I button to
automatically search the band.
• Manual Tuning: Press the STOP (.) button to select MANUAL and then briefly press the '~.'" button to tune in to a
lower or higher frequency.
Press he MOIST button to listen In Mono/Stereo.
• Each time the button is pressed. the sound switches between STEREO and MONO.
• In a poor reception area, select MONO for a clear, Interference-free broadcast.
0- English