24
connections
25
GB
● CONNECTIONS
CONNECTING AUDIO FROM EXTERNAL COMPONENTS
AUX1 : Connecting an External Component/MP3 player
Components such as an MP3 Player
Audio Cable
(not supplied)
Audio OUT
Connect AUX IN 1 (Audio) on the Home Theater to the Audio Out of the external component/MP3
player.
Press the AUX button on the remote control to select AUX1 input.
You can also use the FUNCTION button on the main unit.
The mode switches as follows :
DVD/CD DIGITAL IN AUX 1 AUX 2 USB FM.
When the unit is powered on and you connect an iPod MP3 player, the unit will charge your iPod's battery.
1.
2.
•
M
AUX2 : Connecting an External Analog Component
Analog signal components such as a VCR.
Connect AUX IN 2 (Audio) on the Home Theater to the Audio Out of the external analog component.
Be sure to match connector colors.
Press the AUX button on the remote control to select AUX 2 input.
You can also use the FUNCTION button on the main unit.
The mode switches as follows :
DVD/CD DIGITAL IN AUX 1 AUX 2 USB FM.
You can connect the Video Output jack of your VCR to the TV, and connect the Audio Output jacks of the VCR
to this product.
OPTICAL : Connecting an External Digital Component
Digital signal components such as a Cable Box/Satellite receiver (Set-Top Box).
Connect the Digital Input (OPTICAL) on the Home Theater to the Digital Output of the external digital
component.
Press the AUX button on the remote control to select DIGITAL IN.
You can also use the FUNCTION button on the main unit.
The mode switches as follows :
DVD/CD DIGITAL IN AUX 1 AUX 2 USB FM.
1.
•
2.
•
M
1.
2.
•
Optical Cable
(not supplied)
AUX2 : Rear Panel OPTICAL : Rear Panel
Audio Cable (not supplied)
If the external analog
component has only one Audio
Out, connect either left or right.
External Analog
Component
External Digital
Component
02068B-HT-XA100,XA100C.indd 24-2502068B-HT-XA100,XA100C.indd 24-25 2008-01-31 오후 4:15:212008-01-31 오후 4:15:21
To Next Page
Loading...
