Samsung HT-XQ100 - Disc Playback Procedures; Loading and Ejecting Discs

23 24
Disc Playback
1
Load a disc vertically into the Disc
Insert Hole.
•
Insert a disc so that the label side faces forward.
DVD VCD CD
•
Playback starts automatically.
2
To eject the disc, press the EJECT
button
•
In this manual, the instructions marked with "DVD ( )" are applicable
to DVD-VIDEO, DVD-AUDIO, and DVD-R/RW discs.
Where a particular DVD type is mentioned, it is indicated separately.
•
Depending on the content of the disc, the initial screen may appear different.
DVD
Note
Groups and tracks (DVD-AUDIO)
•
DVD-audio is divided into several large sections called "groups" and
smaller sections called "tracks". Numbers are allotted to these sections.
These numbers are called "group numbers" and "track numbers".
GROUP 1 GROUP 2
TRACK 1 TRACK 2 TRACK 1 TRACK 2TRACK 3
Titles and chapters (DVD-VIDEO)
•
DVD-video is divided into several large sections called "titles" and smaller
sections called "chapters". Numbers are allotted to these sections.
These numbers are called "title numbers" and "chapter numbers".
TITLE 1 TITLE 2
CHAPTER 1 CHAPTER 2 CHAPTER 1 CHAPTER 2CHAPTER 3
Tracks (Video and music CDs)
•
Video and music CDs are divided into sections called "tracks".
Numbers are allotted to these sections. These numbers are called
"track numbers".
TRACK 1 TRACK 2 TRACK 4 TRACK 5TRACK 3
Files (DivX)
•
DivX is divided into sections called "files".
Numbers are allotted to these sections. These numbers are called
"file numbers".
FILE 1 FILE 2
Disc terminology
Before Using Your Home Theater
•
Depending on the content of the disc, the initial screen may appear different.
Note
Caution
•
Avoid getting fingerprints on the writing surface of a disc.
It may cause the disc to not read properly.
ENG
OPERATION
XQ100(1~40)_XAC_ENG 2003.3.23 6:48 PM Page 26