Samsung HT-Z320 - Disc Playback

37
ENG
● PLAYBACK
DISC PLAYBACK
dB
Press the 1. OPEN/CLOSE ( ) button to open the disc tray.
Load a disc.2.
Place a disc gently into the tray with the disc’s label 1
facing up.
Close the compartment by pressing the 3. OPEN/CLOSE
( ) button again.
Playback starts automatically.1
To stop playback, press the STOP (
) button during playback.
If pressed once, 1 PRESS PLAY is displayed and the stop position will be stored in memory. If the
PLAY (
) button or ENTER button is pressed, playback resumes from the stop position. (This
function works only with DVDs.)
If pressed twice, 1 STOP is displayed, and if the PLAY (
) button is pressed, playback starts from the
beginning.
To temporarily pause playback, press the
PAUSE ( ) button during playback.
To resume playback, press the 1 PLAY ( ) or ENTER button.
M
Depending on the content of the disc, the initial screen may appear different. 
Pirated discs will not run in this player because they violate the CSS (Content Scrambling System : 
a copy protection system) recommendations.
FUNC.