Samsung HW-J551 - QUICK INSTALLATION GUIDE - EXTERNAL DEVICE CONNECTIONS; Connecting via HDMI Cable; Connecting via Optical; AUX Cable; QUICK INSTALLATION GUIDE - INSTALLING THE WALL MOUNT

Connections with External
Device
Method 1 : HDMI Cable
If you have external devices(BD/Game console/
Set-top box). you can enjoy them through Soundbar
with high quality sound by connecting HDMI cables
(not supplied) . It needs two HDMI cables .
D
HDMI Cable
(not supplied)
I ~ I
1. Connect HDMI Cable to HDMI (ARC) port of TV .
2. Connect the HDMI cable to the HDMI OUT(TV)
port on Soundbar .
3. Connect the HDMI cable between the HOM IIN
port
on Sound bar and the HDMI OUT port on
your digital device .
4. Press the ( ~ ) button on the top panel of
Sound bar or the SOURCE button on remote
control to select the HDMI mode.
Method 2 : Optical/ AUX Cable
This unit comes equipped with one optical in digital
jack and one audio analog in jack, giving you two
ways to connect it to a TV .
EXternal Device : BD/DVD Player/Set-top BOX/
GAME Console/etc.
Optical Cable
D
l
ml ~·
OPnCAL OUT OPnCAL IN
,..,:
tl ," 1
( 6 ~)
L
AUX Cable
(not supplied)
~ ~ ~
AUXOUT
AUXIN
Using Optical in
Press the ( ~ ) button on the main unit's top panel
or the SOURCE button on the remote control to
select the D.IN mode .
Using AUX jack
Press the ( ~ ) button on the main unit's top panel
or the SOURCE button on the remote control to
~ select the AUX mode .
5. VFD displays HDMI and now Sound bar will make
high quality sound .
Installing the Wall Mount
1. Place the installation gu i de against the wall
surface .
•
The installation guide must be level.
• If the TV is mounted on the wall, install the
Sound bar at least 2 inches (5 em) below the
TV.
..../ If the wall is not strong enough to support the
unit,
reinforce the wall or install the unit on a
different wall that
can support the unit's
weight.
..../ Purchase and use the fix i ng screws or anchors
appropri ate for the kind of wall you have
(p l aster board, iron board, wood, etc.) .
..../ Purchase wall mounting screws according to the
type and thickness of the wall you will mount
the Soundbar on .
- Diameter:
M5
- Length : 1 3/8 inches (35 mm) or longer
recommended.
2. Mark the location where the screws will go
through on the wall, and then remove the
installation guide . Next, drill holes for the screws
using an appropriately sized drill bit.
3. Fasten the wall mounts and screws to the
marked locations .
•
The left and right mounts are different shapes .
Make sure to position them correctly .
4. Secure the two holder screws to the screw holes
on the back of the Soundbar's mam body, one
on the left and one on the right.
5. Insert the USB Cable into the back of the
Soundbar before installing it on the wall .
Wall Mounting the Soundbar
6. Set the holder screws on the back of the
Sound bar into the grooves of the wall mounts .
For safe installation. make sure to push the
holder screws all the way to the bottom of the
grooves .