9
ENG
REMOTE CONTROL
REMOTE CONTROL
REMOTE CONTROL BUTTONS AND FUNCTIONS
WOOFER
You can control the woofer volume.
Press the Woofer button, and then press the
#
,
$
button to increase
or decrease the subwoofer volume. You can select SW (-12, -6,-5,-4,-
3,-2,-1, 0,+1,+2,+3,+4,+5,+6).
AUTO POWER
Auto Power Link: Synchronizes the Soundbar to a connected Optical
source via the Optical jack so it turns on automatically when you turn
on your TV.
(Auto Power Link : Default OFF, ON-ANYNET+ / OFF-POWER LINK or
OFF-ANYNET+ / ON-POWER LINK ). The Anynet+ function lets you
control the Soundbar with the remote from an Anynet+ compatible
Samsung TV. The Soundbar must be connected to the TV via an HDMI
cable.
* Anynet+:
Press the AUTO POWER button to turn the Anynet+
function on or off.
REPEAT
Press to set the REPEAT function during music playback from a USB
device.
OFF-REPEAT : Cancels Repeat Playback.
TRACK-REPEAT : Repeatedly play a track.
ALL-REPEAT : Repeatedly play all tracks.
RANDOM-REPEAT : Plays tracks in random order.
(A track that has already been played may be played again.)
MUTE
You can turn the volume down to 0 with the push of a button.
Press again to restore the sound to the previous volume level.
SOURCE
Press to select a source connected to the Soundbar.
Skip Forward
If there is more than one file on the device you are playing, and you
press the $ button, the next file is selected.
●
Soundbar is a Samsung proprietary name.
●
Operate the TV using the TV's remote control.
SOUND CONTROL
Press to select TREBLE, BASS, or AUDIO SYNC. Then, use the
#
,
$
buttons to adjust the Treble, Bass volume from -6 to +6.
If the Soundbar is connected to a digital TV and the video appears out
of sync with the audio, press the SOUND CONTROL button to sync the
audio with the video.
Use the #,$ buttons to set the audio delay
between 0 ms and 300 ms.
In USB mode, TV mode, and BT mode, the
Audio Sync function may not work.
Press and hold the SOUND CONTROL button for about 5 seconds to
adjust the sound for each frequency band. 150Hz, 300Hz, 600Hz,
1.2KHz,2.5KHz, 5KHz and 10KHz are selectable and each can be
adjusted to a setting between -6 and +6.
To Next Page
Loading...
